Most relevant vacancies

Show all vacancies

Orderpicker/ warehouse operator

(m/f/x)

Anzegem, BE

Permanent job

Day - Full-time

As an Orderpicker / Warehouse Operator, your responsibilities will include: <ul><li>Preparing orders using a scanning system </li></ul><ul><li>Restocking warehouse shelves </li></ul><ul><li>Performing quality and inventory checks </li></ul><ul><li>Assisting with loading trucks </li></ul><ul><li>Handling general warehouse duties </li></ul><ul><li>After a training and onboarding period, you will also work as a reach truck operator </li></ul>

14/07/2026

Project Manager

(m/f/x)

Espierres, BE

Permanent job

Day - Full-time

The Project Manager is responsible “from A to Z” for managing, organizing and executing on-site a wide spectrum of (inter)national complex projects in accordance with the stow methodology.Work preparation & project follow-up<ul><li>Acting as the SPOC (Single Point of Contact) for assigned projects towards clients, subcontractors, and the stow team</li><li>Assessing the operational, technical, and financial feasibility of projects and anticipating risks where applicable</li><li>Attending kick-off meetings, technical/site meetings, commercial meetings, planning meetings, and site inspections with clients or internal stow departments</li><li>Ensuring all engineering and preparatory activities are completed</li><li>Visiting sites, setting up detailed project planning, and checking requirements for mobilization of equipment and resources</li><li>Clearly communicating project execution and progress</li></ul>Supervision of operational activities<ul><li>Willingness to travel to sites (approximately 50% of time)</li><li>Monitoring project progress and quality, identifying deviations, and implementing corrective actions</li><li>Managing operational staff and subcontractors during project execution</li><li>Supervising safe execution on site in accordance with QSHE regulations and administration</li><li>Supervising assembly methods and verifying quality of delivered materials</li></ul>Contract management<ul><li>Managing claims, identifying contract variations and delay notifications</li><li>Ensuring variations are communicated and negotiated with the client according to contractual requirements</li></ul>Financial follow-up & administration<ul><li>Monitoring budget and daily cost control, preparing progress reports, and initiating invoicing</li><li>Checking and approving all project-related incoming invoices</li><li>Identifying commercial opportunities and additional billable services to improve project profitability</li></ul>

14/07/2026

Maintenance Technician

(m/f/x)

Espierres, BE

Permanent job

2-shift system

To strengthen our maintenance team, we are looking for a Facility Maintenance Technician – Buildings & HVAC.Reporting to the Maintenance Manager, you will be responsible for the preventive and corrective maintenance of all installations and technical equipment on site. This is an operational hands-on position without managerial responsibilities, where you act as a technical reference person and coordinate external interventions, mainly related to HVAC installations.Your responsibilitiesMaintenance & Operations<ul><li>Perform preventive and corrective maintenance on building installations.</li><li>Troubleshoot technical installations outside the production environment.</li><li>Ensure the safety, availability, and compliance of equipment.</li><li>Test and monitor legally required installations (sprinkler systems, periodic inspections, etc.).</li><li>Strictly apply QSHE and environmental procedures.</li></ul>Technical Installations & HVAC<ul><li>Carry out interventions on heating, ventilation, and air conditioning systems.</li><li>Diagnose and analyse technical malfunctions.</li><li>Monitor the performance of installations and maintenance interventions.</li><li>Act as the technical point of contact for building installations.</li></ul>External Contractors Follow-up<ul><li>Welcome external contractors and provide safety instructions.</li><li>Act as the operational contact person for suppliers.</li><li>Check that executed works comply with technical specifications.</li><li>Monitor the progress of interventions and report deviations.</li><li>Ensure proper documentation and traceability of interventions and inspections.</li></ul>Organisation & Continuous Improvement<ul><li>Plan and monitor maintenance activities using internal tools.</li><li>Participate in continuous improvement projects and site optimisation initiatives.</li><li>Suggest technical and organisational improvements.</li><li>Provide occasional technical support to site teams when required.</li></ul>Working Environment<ul><li>Interventions across the entire site.</li><li>Use of measurement and diagnostic tools (multimeter, inspection equipment, etc.).</li><li>Personal protective equipment provided.</li><li>Use of specific equipment (cherry picker, forklift – certifications required).</li><li>Use of basic IT tools for maintenance tracking and reporting.</li></ul>

14/07/2026

Group Quality Engineer

(m/f/x)

Espierres, BE

Permanent job

Day - Full-time

The Group Quality Engineer provides general support to all production plants and the purchasing department within the stow Group regarding quality-related topics. These include quality and process audits, implementation and creation of Group standards, and investigation of technical non-conformities. In addition, the Group Quality Engineer cooperates with R&D regarding newly developed products.Your tasks & responsibilities<ol><li>Quality & Compliance</li></ol><ul><li>Improving and aligning quality standards across all production plants (France, Germany, Portugal, Czech Republic, Turkey) and key suppliers</li><li>Establishing continuous improvement projects</li><li>Investigating technical production non-conformities</li><li>Supporting the implementation and further development of ISO9001 and EN1090</li><li>Coordinating activities between plants and departments (R&D, Engineering)</li><li>Collaborating with local QHSE managers to raise quality standards</li><li>Validating suppliers and performing supplier audits</li><li>Preparing and participating in customer audits</li></ul><ol><li>Documents</li></ol><ul><li>Creating technical specifications and policies </li></ul><ol><li>Reporting</li></ol><ul><li>Creating measurement reports (conventional and using 3D measuring arm & scanner)</li></ul><ol><li>General Support</li></ol><ul><li>Traveling to production plants, suppliers, and customer sites (approx. 30%)</li><li>Supporting continuous improvement projects related to quality</li><li>Supporting the purchasing department with technical expertise when required</li></ul>

14/07/2026

Supply Dept - Interim

(m/f/x)

Diest, BE

Interim

Day - Full-time

Team/division description: Located just outside Brussels is our European Distribution Centre in Diest called Toyota Parts Centre Europe (TPCE) employing 930 people. It is responsible for the procurement, storage and logistics supply of a dedicated range of Toyota/Lexus spare parts, accessories and technical campaign parts supporting the both the new car sales and existing customer vehicles service and warranty needs. The Diest facility itself receives parts from over 700 different suppliers (from Japan to local suppliers) managing over 250,000 part numbers and >150 trucks per day in a dedicated 100,000m2 facility. It's 2 outbound logistics roles covers; providing direct overnight supply to >600 Toyota dealers in local region, and supporting the 13 European Regional Distribution Centres to ensure a consistent high level of Just In Time service to all NMSC's and Toyota dealers within Europe and our final customers beyond. Your responsibilities: Responsible for the procurement and inventory control of parts and accessories sourced from local suppliers. <ul><li>Analyze stock and service levels. Initiate necessary improvement actions to meet our customers' service expectation in line with targets for key KPI's :- follow up allocation Service Rate to Toyota customers- solve backorders to Toyota customers• Respond to customer complaints in a professional way• Improve supplier performance.  Create & follow up actions plans with supplier to cover any gap to target, using the TPS (Toyota Production System) philosophy and Toyota problem solving approach:- Create/map/review & improve processes- Understand abnormalities caused by supplier in our warehouse. Visit supplier to understand rootcause, to find countermeasures, to improve process to avoid recurrence, to support in creation of standards.• Ensure availability of parts to European Markets through regional locations and beyond to the end customer, for both current and future models of Toyota and Lexus vehicles. </li></ul>

14/07/2026

Metal Operator 2PL

(m/f/x)

Dendermonde, BE

Permanent job

2-shift system

We are seeking an operator for a dynamic metal company in the Dendermonde region who will be responsible for manufacturing high-quality products such as rebar and spacers. You will work with modern technologies in an innovative and sustainable environment and contribute to the company's success.

13/07/2026

Metal Operator 2PL

(m/f/x)

Dendermonde, BE

Permanent job

2-shift system

We are seeking an operator for a dynamic metalworking company in the Dendermonde region who will be responsible for manufacturing high-quality products such as rebar and spacers. You will work with modern technologies in an innovative and sustainable environment and contribute to the company's success.

13/07/2026

Electric Pallet - 2 shifts/night - Everg...

(m/f/x)

Desteldonk, BE

Permanent job

2-shift system

The company is a leading contract logistics provider in Northern Europe, delivering customized logistics solutions that drive efficiency, quality, and sustainability. From consultancy and design to execution and continuous improvement, we take full ownership of logistics operations and create long-term value for our clients. At the company, people make the difference. We are excited to welcome motivated professionals who want to contribute to the future of logistics. As an Electric Pallet Truck (EPT) Operator, you play an important role in the daily warehouse operations. You ensure goods are moved safely, accurately, and efficiently, supporting a smooth flow throughout the warehouse. Your Responsibilities:<ul><li>Safely operate an electric pallet truck (EPT) to transport goods within the warehouse.</li><li>Load and unload materials while handling products with care.</li><li>Place and organize goods according to warehouse procedures.</li><li>Perform routine safety and functionality checks on the EPT.</li><li>Support inventory handling and stock replenishment activities.</li><li>Maintain cleanliness, order, and safety in your work area.</li><li>Comply with all company rules, safety standards, and operational procedures.</li></ul>

13/07/2026

Slaughterhouse hanger

(m/f/x)

Berchem (O.-Vl.), BE

Permanent job

Day - Full-time

Your tasks:<ul><li>You hang poultry on the slaughter line;</li><li>You ensure that the production process runs smoothly;</li><li>You work according to the applicable safety and hygiene regulations;</li><li>You pay attention to animal welfare and quality;</li><li>You help maintain a clean and organized workplace.</li></ul>

10/07/2026

Cutting room operator

(m/f/x)

Berchem (O.-Vl.), BE

Permanent job

Day - Full-time

Your tasks:<ul><li>You are responsible for preparing and processing materials in the cutting room;</li><li>You operate the necessary machines and follow the production instructions;</li><li>You check the quality of the cut pieces;</li><li>You ensure that products are correctly sorted and prepared;</li><li>You work accurately and keep your workplace clean.</li></ul>

10/07/2026

5.5-Ton Forklift Operator – Night Shift...

(m/f/x)

Appelterre-Eichem, BE

Interim

Night work

Job Offer – 5.5-Ton Forklift Operator (H/F/X)Location: NinoveFor a company operating in the metal industry, we are looking for an experienced 5.5-ton Forklift Operator (H/F/X) to join the night shift team.Your Responsibilities<ul><li>Safely operate a 5.5-ton forklift.</li><li>Transport and move metal parts up to 16 meters in length.</li><li>Perform precise maneuvers, including moving long loads through a 6-meter-wide opening.</li><li>Load, unload, and supply materials to the different production areas.</li><li>Comply with all company safety rules and operating procedures.</li></ul>Working HoursNight Shift:<ul><li>Monday to Thursday: 10:00 PM – 6:00 AM</li><li>Friday: 8:00 PM – 3:00 AM</li></ul>Candidate Profile<ul><li>You hold a valid forklift operator certificate.</li><li>You have proven experience operating a 5.5-ton forklift.</li><li>You are able to handle long loads accurately and safely.</li><li>You are reliable, independent, and committed to following safety regulations.</li><li>You are available to start as soon as possible.</li><li>You have your own means of transportation (car, motorcycle, scooter, or bicycle) to travel to the site in Ninove, as public transportation does not accommodate the working hours.</li></ul>What We Offer<ul><li>A position within a well-established company in the metal industry.</li><li>A varied role in a dynamic industrial environment.</li><li>A night shift schedule with a quick start.</li><li>A competitive salary based on your experience and the applicable sector condition</li></ul>

10/07/2026

5.5-Ton Forklift Operator – Two Shifts –...

(m/f/x)

Appelterre-Eichem, BE

Interim

2-shift system

Job Offer – 5.5-Ton Forklift Operator (H/F/X)Location: NinoveFor a company operating in the metal industry, we are looking for an experienced 5.5-ton Forklift Operator (H/F/X) to join the team.Your Responsibilities<ul><li>Safely operate a 5.5-ton forklift.</li><li>Transport and move metal parts up to 16 meters in length.</li><li>Perform precise maneuvers, including moving long loads through a 6-meter-wide opening.</li><li>Load, unload, and supply materials to the different production areas.</li><li>Comply with all company safety rules and operating procedures.</li></ul>Working HoursTwo-shift schedule:<ul><li>Monday to Thursday:<ul><li>6:00 AM – 2:00 PM</li><li>2:00 PM – 10:00 PM</li></ul></li><li>Friday:<ul><li>6:00 AM – 1:00 PM</li><li>1:00 PM – 8:00 PM</li></ul></li></ul>Candidate Profile<ul><li>You hold a valid forklift operator certificate.</li><li>You have proven experience operating a 5.5-ton forklift.</li><li>You are able to handle long loads accurately and safely.</li><li>You are reliable, independent, and committed to following safety regulations.</li><li>You are available to start as soon as possible.</li><li>You have your own means of transportation (car, motorcycle, scooter, or bicycle) to travel to the site in Ninove, as public transportation does not accommodate the working hours.</li></ul>What We Offer<ul><li>A position within a well-established company in the metal industry.</li><li>A varied role in a dynamic industrial environment.</li><li>A two-shift schedule with a quick start.</li><li>A competitive salary based on your experience and the applicable sector conditions.</li></ul>

10/07/2026

Logistics Assistant – Cutting Department...

(m/f/x)

Lendelede, BE

Permanent job

Day - Full-time

We are looking for a logistics assistant for a combined role within the cutting department and as backup for Kaai 12. This is a full-time position on day shifts or a fixed morning shift.Your duties will include:Receiving and dispatching goods in the cutting departmentLoading and unloading lorriesOperating the reach truckSupporting day-to-day operations at Kaai 12Working hours:06:00 – 14:45Fridays until 12:15

10/07/2026

Butcher

(m/f/x)

Lendelede, BE

Permanent job

Day - Full-time

We are looking for motivated butchers for various roles within our slaughterhouse and cutting department. Depending on your experience and interests, you may be assigned as a slaughterhouse hanger, Cutting line hanger or butcher.As a Slaughterhouse Hanger:<ul><li>Day shift (6am – 2.45pm, Friday 6am – 12.15pm)</li><li>Assistant with live turkeys</li><li>Physically demanding work</li></ul>As a Cutting line hanger:<ul><li>Day shift (6am – 2.45pm, Friday 6am – 12.15pm)</li><li>Assistant for pre-slaughtered turkeys</li><li>Physically demanding work</li></ul>Butcher (Left- or right-handed)<ul><li>Day shift (6am – 2.45pm, Friday 6am – 12.15pm)</li><li>Experience with a knife is essential</li></ul>

10/07/2026

Customer Support Advisor: English + Germ...

(m/f/x)

Oostakker, BE

Fixed-term contract

Full Continuous

For our client we're looking for a Customer Service Officer. In this role, you become the voice of support for drivers facing unexpected vehicle issues across Europe. You'll be part of a fast-paced and multilingual contact center where your communication skills, empathy, and sense of urgency play a crucial role in keeping transport moving. - Handle incoming assistance requests from international customers experiencing roadside vehicle breakdowns. - Take ownership of each case by coordinating with local service providers and technicians until the issue is resolved. - Maintain constant communication with both the customer and service partner, providing regular updates and reassurance. - Think on your feet and apply a proactive approach to problem-solving, often finding creative solutions under time pressure. - Be an integral part of a tight-knit, multilingual team that thrives on collaboration and mutual support. - Operate within a 24/7 environment, where teamwork and flexibility are essential to ensuring seamless customer experiences.

10/07/2026

Customer Support Advisor: English + Germ...

(m/f/x)

Oostakker, BE

Fixed-term contract

Full Continuous

10/07/2026

Customer Service Officer: English + Poli...

(m/f/x)

Oostakker, BE

Fixed-term contract

Full Continuous

10/07/2026

Customer Service Officer: English + Czec...

(m/f/x)

Oostakker, BE

Fixed-term contract

Full Continuous

10/07/2026

Operator Packaging 2 shifts

(m/f/x)

Wielsbeke, BE

Permanent job

2-shift system

As a packing operator, you will be responsible for the efficient packaging of our high-quality products, whilst adhering to the established quality standards. You will ensure the smooth running of the packaging lines and carry out quality checks to guarantee a perfect result.With your eye for detail and commitment to quality, you will actively contribute to the success of our production. We offer a stimulating working environment, on-the-job training and a competitive salary.

10/07/2026

Logistics Operator 2 shifts

(m/f/x)

Wielsbeke, BE

Permanent job

2-shift system

Our client is a growing and innovative player in the food industry, where quality, technology and teamwork are key priorities. In a modern and highly automated logistics environment, you will play a key role in ensuring the smooth and safe flow of goods. As a logistics operator, you will work alongside a close-knit team and actively contribute to efficient processes and continuous improvement within the logistics department.Duties<ul><li>Monitoring and adjusting logistics processes to ensure continuity</li><li>Identifying and resolving faults or irregularities in the logistics flow</li><li>Carrying out minor technical maintenance on equipment</li><li>Operating automated systems, cranes and shuttles in the cold store</li><li>Analysing process data and reporting on trends</li></ul>

10/07/2026

accept_cookie_policy	This tells us whether the user has accepted the cookie policy.
c-functional	Were the functional cookies accepted (unchangeable)
c-analytics	Were the analytical cookies accepted
c-voorkeur	Have your preferred cookies been accepted?
c-social	Have social media cookies been accepted?

Facebook Pixel	Users who ended up at AGO Jobs & HR through an advertisement on Facebook. landed at AGO Jobs & HR.
Google Analytics	To track your browsing behaviour which we use for analysis purposes.

We use cookies!

Set your cookie preferences

Senior Administrative Assistant Manufacturing

(m/f/x)

Job description

Requirements

Languages

Offer

Most relevant vacancies

Orderpicker/ warehouse operator

(m/f/x)

Project Manager

(m/f/x)

Maintenance Technician

(m/f/x)

Group Quality Engineer

(m/f/x)

Supply Dept - Interim

(m/f/x)

Metal Operator 2PL

(m/f/x)

Metal Operator 2PL

(m/f/x)

Electric Pallet - 2 shifts/night - Everg...

(m/f/x)

Slaughterhouse hanger

(m/f/x)

Cutting room operator

(m/f/x)

5.5-Ton Forklift Operator – Night Shift...

(m/f/x)

5.5-Ton Forklift Operator – Two Shifts –...

(m/f/x)

Logistics Assistant – Cutting Department...

(m/f/x)

Butcher

(m/f/x)

Customer Support Advisor: English + Germ...

(m/f/x)

Customer Support Advisor: English + Germ...

(m/f/x)

Customer Service Officer: English + Poli...

(m/f/x)

Customer Service Officer: English + Czec...

(m/f/x)

Operator Packaging 2 shifts

(m/f/x)

Logistics Operator 2 shifts

(m/f/x)

More suitable jobs with My AGO